Inoxpa India Private Limited
Inoxpa India Private Limited
Shivane, Pune, Maharashtra
GST No. 27AABCI8905L1Z8
TrustSEAL Verified
SEND SMS
SEND EMAIL

Pharmaceutical Ointment Machinery Section

Our range of products include inoxpa ointment cream mixer, inoxpa ointment pump and inoxpa lotion cream transfer pump.

Inoxpa Ointment Cream Mixer

Inoxpa Ointment Cream Mixer
  • Inoxpa Ointment Cream Mixer
Get Best Quote
Approx. Price: Rs 60 Lakh / PieceGet Latest Price

Product Details:

BrandInoxpa
Exterior surface finish bright polishRa < 0.8 um
Usage/Applicationpharmaceutical,cosmetics,food and personal care products industries.
Design TypeStandard
I Deal InNew Only
Parts in contact with the productAISI 316 (EN 14404)

Counter-rotating  are used for Cream mixing and homogenizing dispersed products at a controlled temperature with an optimum performance, regardless of the product viscosity.
These units are intended primarily for pharmaceutical, cosmetics, food and personal care products industries.
They are ideal for processes which require heating, vacuum, premixing, additions, vigorous agitation, emulsion or dispersion, as well as pressure and temperature. The skid can work at -1 to 0.5 bar and the double jacket - up to 3 bar. The operating temperature is between -7 a 120 ºC.
It is possible to control the following parameters: temperature, pressure, pH, weight and viscosity.
The unit is provided with a cleaning system with rotating spray balls in order to be connected to a CIP and SIP cleaning system.
Some examples of products that can be treated with these units are all kinds of creams, gels, sunscreens, depilatories, makeup, deodorants, sauces, pates, pastes, shoe creams, emulsions, paraffin mixtures, wax mixtures, carbopol dispersions, tooth pastes, products intended for drugstores and parapharmacies.

Operating Principle:
The unit has a sealed tank where mixing takes place by means of an anchor type agitator, a central shaft with counter-rotating blades that move in the opposite direction to the anchor, and an emulsifying disperser located at the bottom of the shaft.
The unit normally operates under vacuum during the entire duration of the mixing process. When the agitation starts, the anchor and the central blades rotate slowly while the bottom mixer is put into operation.
Subsequently, the product to be dispersed or emulsified is added and the speed of the blades on the central shaft is increased.
When the mixing is complete, the agitator speed decreases and the bottom mixer is stopped; at the same time the chamber begins to cool down. When the product reaches the desired temperature, any required additives are added to the mixture, typically when cold; depending on the process, the speed of the agitators may be increased slightly. It is possible to recirculate the product and, if necessary, an emulsifier can be added to the process.
The product discharge system can be by gravity or with a pump and, if necessary, using positive pressure.
Finally, the tank is cleaned by the CIP system.

Design & Features:
These units are available in 3 arrangements: on support base, on support feet and a metal structure, or on concrete floor, with or without automatic lid lifting. The units with support bases are designed to accept all auxiliary equipment necessary for the unit to operate autonomously.
These units are built to FDA standards.
For good temperature control, the system includes a PT100 or 4-20 mA temperature probe located on one end of the central shaft of the agitator in order to obtain product temperature data. Its reliability is excellent because of its distance from the boiler walls in contact with the hot and cold chamber. It has a second probe located in the heating and cooling chamber to control the latter.

Options:
Weighing system.
Cleaning system.
Support system and lid lifting system.
Request
Callback
Yes! I am Interested

Inoxpa Ointment Pump

Inoxpa Ointment Pump
  • Inoxpa Ointment Pump
Get Best Quote
Approx. Price: Rs 3 Lakh / PieceGet Latest Price

Product Details:

BrandInoxpa
Usage/Applicationpharmaceutical,cosmetics,food and personal care products industries.
I Deal InNew Only
Interior surface finish bright polishRa < 0.8 um
Other stainless steel partsAISI 304 (EN 14301)
Parts in contact with the productAISI 316 (EN 14404)
Design TypeStandard

Counter-rotating are used for mixing and homogenizing dispersed products at a controlled temperature with an optimum performance, regardless of the product viscosity.
These units are intended primarily for pharmaceutical, cosmetics, food and personal care products industries.
They are ideal for processes which require heating, vacuum, premixing, additions, vigorous agitation, emulsion or dispersion, as well as pressure and temperature. The skid can work at -1 to 0.5 bar and the double jacket - up to 3 bar. The operating temperature is between -7 a 120 ºC.
It is possible to control the following parameters: temperature, pressure, pH, weight and viscosity.
The unit is provided with a cleaning system with rotating spray balls in order to be connected to a CIP and SIP cleaning system.
Some examples of products that can be treated with these units are all kinds of creams, gels, sunscreens, depilatories, makeup, deodorants, sauces, pates, pastes, shoe creams, emulsions, paraffin mixtures, wax mixtures, carbopol dispersions, tooth pastes, products intended for drugstores and parapharmacies.

Operating Principle:
The unit has a sealed tank where mixing takes place by means of an anchor type agitator, a central shaft with counter-rotating blades that move in the opposite direction to the anchor, and an emulsifying disperser located at the bottom of the shaft.
The unit normally operates under vacuum during the entire duration of the mixing process. When the agitation starts, the anchor and the central blades rotate slowly while the bottom mixer is put into operation.
Subsequently, the product to be dispersed or emulsified is added and the speed of the blades on the central shaft is increased.
When the mixing is complete, the agitator speed decreases and the bottom mixer is stopped; at the same time the chamber begins to cool down. When the product reaches the desired temperature, any required additives are added to the mixture, typically when cold; depending on the process, the speed of the agitators may be increased slightly. It is possible to recirculate the product and, if necessary, an emulsifier can be added to the process.
The product discharge system can be by gravity or with a pump and, if necessary, using positive pressure.
Finally, the tank is cleaned by the CIP system.

Design & Features:
These units are available in 3 arrangements: on support base, on support feet and a metal structure, or on concrete floor, with or without automatic lid lifting. The units with support bases are designed to accept all auxiliary equipment necessary for the unit to operate autonomously.
These units are built to FDA standards.
For good temperature control, the system includes a PT100 or 4-20 mA temperature probe located on one end of the central shaft of the agitator in order to obtain product temperature data. Its reliability is excellent because of its distance from the boiler walls in contact with the hot and cold chamber. It has a second probe located in the heating and cooling chamber to control the latter.

Options:
Weighing system.
Cleaning system.
Support system and lid lifting system
Request
Callback
Yes! I am Interested

Inoxpa Lotion Cream Transfer Pump

Inoxpa Lotion Cream Transfer Pump
  • Inoxpa Lotion Cream Transfer Pump
Get Best Quote
Approx. Price: Rs 3 Lakh / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
ColorStandard
BrandInoxpa
FeaturesAutomatic lubricators are fitted
I Deal InNew Only
Automation GradeAutomatic

Pumping creams can be a delicate process. For this reason, a number of factors have to be taken into account.    

Because the viscosity of the fluid can be very high, it is essential to select the appropriate creams pumps. We recommend using rotary lobe pumps: in addition to being capable of pumping high-viscosity products efficiently, they are hygienic and easy to clean.

Maintaining a constant temperature is very important. Too high a temperature can cause caramelisation of the product, whereas too low a temperature can lead to solidification or crystalisation, resulting in a reduced flow and the corresponding loss in efficiency and /or equipment damage. This could even cause the pump to become completely blocked.

To maintain the temperature of the creams and avoid it solidifying inside the pump we recommend fitting a heating jacket to the front cover and/or to the pump body.

SOLUTION:

creams is an abrasive, shear-sensitive product prone to caramelising, which means that aggressive pumping could damage both the product and any materials that are in contact with it.  For this reason, we recommend low working speeds, always taking into account the type of chocolate and the sealing system being used.

Guaranteeing that the product is contained within a well-sealed pump is particularly important. For creams pumping applications, we offer various options (all in compliance with FDA and EC-1935/2004):

a. Lip seal: the most economical option: maximum working pressure of 4 bar. Only recommended for very fluid and relatively non-abrasive creams, otherwise the useful life of the seals could be very short.

b. Lip seal with automatic or manual lubricator: maximum working pressure of 4 bar.

c. Mechanical seal with quench and automatic or manual lubricator: maximum working pressure of 4 bar. It consists of single mechanical seals (SiC/SiC/Viton) with lip seal in the rear chamber.

d. Double mechanical seal with automatic lubricator: maximum working pressure limit depends on the pump model.

DESIGN & FEATURES:

The lubricator is a high precision system with electromagnetic actuator, which pressurizes the chambers of the mechanical seals with food-grade grease certified according to USDAH1.

The flow of lubricating grease can be adjusted according to the requirements of the equipment being lubricated, potentially lasting up to 12 months. Hence, the friction faces of the mechanical seals will always work with clean grease between the contact surfaces rather than chocolate, which is abrasive and can caramelize, leading to rapid wear of the surfaces.

For the low-pressure options (b and c), either a manual or an automatic lubricator may be fitted. The manual option is battery powered and must be started and stopped by the operator. The automatic option works via an external power supply, hence it is possible to link it directly to the pump.

 

For the high-pressure option (d), only automatic lubricators are fitted. In addition, a relief valve is included to eject the grease from the chamber, avoiding any damage occurring due to excess pressure.

Request
Callback
Yes! I am Interested
X

Product Videos

Explore More Product



Reach Us
Shankar Kalkundri (DGM Sales)
Survey No. 83, Hissa No. 2/6/A
Shivane, Pune - 411023, Maharashtra, India



Call Us


Send E-mailSend SMS