Inoxpa India Private Limited
Inoxpa India Private Limited
Shivane, Pune, Maharashtra
GST No. 27AABCI8905L1Z8
TrustSEAL Verified
Call 08041947367 60% Response Rate
SEND EMAIL

Inoxpa Blenders

Leading Manufacturer of horizontal blender mh-20 mh-26, mm table blender, m-226 / m-440 blender, table blender mm, inoxpa mm-3 355 kg table blender and inoxpa mv250 250 litres mv v-type solid blender from Pune.

Horizontal Blender MH-20 MH-26

Horizontal Blender MH-20 MH-26
  • Horizontal Blender MH-20 MH-26
Get Best Quote
Approx. Price: Rs 2.5 Lakh / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
BrandInoxpa
GasketsFPM or PTFE
ConnectionsDIN, SMS
FeatureHigh level sensor for solids
Mechanical sealSiC / SiC / EPDM
External surface finishBright polish

Application:
  • The horizontal blender is used to dissolve solid/powder products into a circulating liquid. The unit is limited to the suction of small amount of solids as the blender has no table for bags and the hopper is smaller than that of the table blender.

Operating Principle:
  • The blender is a compact unit, it consists of a centrifugal pump with a venturi system on the suction side and a hopper with a butterfly valve above the venturi to add solid product to the pumped liquid. In this blender, the suction and venturi system are set horizontally.
  • The venturi system and the suction of the pump creates a negative pressure at the base of the hopper. When the valve of the hopper opens, the solids are drawn from the hopper and are dissolved in the liquid when they pass through the casing of the pump.
  • To achieve the best possible dissolution, it is recommended to recirculate the product (batch production) untill all the solid/powder product is sucked in and then, when the solid product is completely incorporated into the liquid product, continue recirculating the product for a while. In some cases, it can be used in-line depending on the solid product to add and the required level of dissolution.

Design And Features:
  • Very simple and versatile equipment for a fast and homogeneous mixing of a wide range of solid products without any contact with atmosphere.
  • Hygienic design.
  • Single mechanical seal.
  • ISO 2852 Clamp connections for easy assembly/disassembly.
  • Cleaning and disinfection without disassembling the unit.

Options:
  • Drain port.
  • Vibrator for hopper.
  • Pneumatically actuated valve + low level sensor for solids.
  • Control panel for the vibrator, level sensors and automated valve.
  • Grid for hopper.

Materials:
  • Parts in contact with the product AISI 316L
  • Other metal parts AISI 304
  • Gaskets EPDM in compliance with FDA
  • Mechanical seal SiC / SiC / EPDM
  • Internal surface finish Ra ≤ 0.8 μm
  • Baseplate surface finish Matt
Request
Callback
Yes! I am Interested

MM Table Blender

MM Table Blender
  • MM Table Blender
  • MM Table Blender
  • MM Table Blender
  • MM Table Blender
  • MM Table Blender
  • MM Table Blender
Get Best Quote
Approx. Price: Rs 8 Lakh / PieceGet Latest Price

Product Details:

Weight185 kg
BrandInoxpa
ModelMM-2
TypeTable Blender
Parts In Contact With The ProductAISI 316L (1.4404)
Other Steel PartsAISI 304 (1.4301)
Gaskets In Contact With The ProductEPDM
Rotary PartSilicon carbide (SiC)
Stationary PartSilicon carbide (SiC)
Internal And Hopper Surface FinishBright polish Ra Less Than Equals To 0,8 Micro m
External Structure And Upper Base Surface FinishMatt
DNi2 Inch
A194
B660
C797
D337
E740
F1340
G1014
H353

The table blender is used to dissolve solids / powders in recirculated liquids. It has a wide range of applications, for example, preparation of pharmaceutical syrops or dissolution of pectin in glucose for marmelade production. Every model has an option with an in-line mixer for a complete dissolution of possible lumps. The typical applications are reconstitution or stabilization of milk in the production of dairy products, and dissolution of sugar for the production of syrup in the beverage industries.

Operating principle :
The table blender is a compact unit, it consists of a centrifugal pump with a venturi system at the suction side and a hopper with a butterfly valve at the upper part to add solids / powders to the pumped liquid. In this blender, the suction and ventury system are set horizontally. If necessary, an in-line mixer can be installed after the centrifugal pump to reduce the size of possible lumps.
The venturi system and the suction of the pump create depression at the base of the hopper. When the valve of the hopper opens, the solids are drawn from the hopper and are totally dissolved when they pass through the casing of the pump.
To achieve the best possible dissolution, it is recommended to recirculate the product (batch production) till all the solid / powder product is suctioned and then, when the solid product is completely incorporated into the liquid, continue recirculating the product for a while. In some cases, the blender can be used in-line depending on the solid product to add and the required level of dissolution.

Features :
  • Very simple and versatile equipment for a fast and homogeneous mixing of a wide range of solid products without any contact with atmosphere.
  • Hygienic design.
  • ISO 2852 Clamp connections for easy assembly/disassembly.
  • Cleaning and disinfection without disassembling the unit.
  • Complete mixing with recirculation.
  • Manually actuated butterfly valve for hopper.
  • Optional in-line mixer for total dissolution of possible lumps in the end product.
  • Hopper welded to the table with a totally smooth easy-to-clean surface.
  • St.St. control panel with Stop/Start button and motor protection.
  • Skid with wheels: 2 rotating + 2 fixed with brakes.
  • Clamp drain port for total drainage of the skid.

Options :
  • Double mechanical seal.
  • Solenoid valve for the seal cooling system.
  • Gaskets: FPM or PTFE.
  • Connections: DIN, SMS.
  • Vibrator for hopper.
  • Frequency converter for the centrifugal pump.
  • Pneumatically actuated valve + lower level sensor for solids.
  • Hygienic upper level sensor for solids.
  • Control panel for the vibrator, level sensors, frequency converter and automated valve.
  • Grid for hopper.
Request
Callback
Yes! I am Interested

M-226 / M-440 Blender

M-226 / M-440 Blender
  • M-226 / M-440 Blender
Get Best Quote
Approx. Price: Rs 5 Lakh / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
BrandInoxpa
Internal Bright polishRa < 0,8 um
ExternalMatt
GasketsEPDM
Stationary partStainless steel (St.St.)
Rotary partCarbon (C)

The blenders are used to mix solids in liquids. 
In the food-processing industry, they provide a perfect solution for reconstituting powdered milk, making syrups, preparing brines, etc.
They can also be used for preparing solid-liquid mixtures in the pharmaceutical, cosmetics and chemical industries.

Operating principle:
The blender basically consists of a casing and a centrifugal pump impeller which are mounted vertically. The suction side has a double-wall pipe that keeps the inlet of solids separate from that of liquids, thus avoiding the formation of lumps before the material enters the casing. 
The liquid enters the mixing chamber at a high speed, thereby creating a vacuum at the center of the impeller, which causes the suction of the solids. The introduction of solids can be regulated by means of a valve situated at the bottom of the hopper.

Design & features:
Simple and versatile assembly for quick and homogeneous mixing of a great variety of solids without contact with the atmosphere. 
Complete mixing with recirculation of the material.
In some applications, it can be used in line, without recirculation. 
Sanitary design.
Easy assembly and disassembly by Clamp connections.
Cleaning can be carried out without disassembling the unit.
Sanitary single mechanical seal.
Standard hopper of 40º for M-226 and 50º for M-440.

Options:
Double flushed seal.
Double pressurised seal.
Connections: DIN, SMS.
Vibrator for the hopper.
Pneumatically actuated valve + hygienic solids lower level sensor.
Hygienic solids upper level sensor.
Control panel for vibrator, solids level sensors, frequency converter, automated valve.
Grid for the hopper.
60º hopper.
Drainage.
ATEX version available.
Internal surface finish: Ra ≤ 0.5 μm.
Request
Callback
Yes! I am Interested

Table Blender MM

Table Blender MM
  • Table Blender MM
Get Best Quote
Approx. Price: Rs 8 Lakh / PieceGet Latest Price

Product Details:

BrandOrpat
ConnectionsDIN, SMS.
GasketsFPM or PTFE
FeaturesClamp drain port for total drainage of the skid
Mechanical sealCooled double
ApplicationMilk Powder, Milk, Cheese & Yogurt

Design and Features:
  • Very simple and versatile equipment for a fast and homogeneous mixing of a wide range of solid products without any contact with atmosphere.
  • IE2 electric motors in compliance with EC Regulation 640/2009.
  • Hygienic design.
  • ISO 2852 Clamp connections for easy assembly/disassembly.
  • Cleaning and disinfection without disassembling the unit.
  • Complete mixing with recirculation.
  • Manually actuated butterfly valve for hopper.
  • Optional in-line mixer for total dissolution of possible lumps in the end product.
  • A table for bags at adequate height facilitates manual feeding.
  • St.St. control panel with Stop/Start button and motor protection.
  • Skid with wheels: 2 rotating + 2 fixed with brakes.
  • Clamp drain port for total drainage of the skid.

Options:
  • Cooled double mechanical seal.
  • Solenoid valve for the seal cooling system.
  • Gaskets: FPM or PTFE.
  • Connections: DIN, SMS.
  • Vibrator for hopper.
  • Frequency converter fo the centrifugal pump.
  • Pneumatically actuated valve + low level sensor for solids.
  • Upper level sensor for solids.
  • St.St.control panel for the vibrator, level sensors, frequency converter and automated valve.
  • Grid for hopper.
  • Sunken grid for hopper.

Application:
  • The table blender is used to dissolve solid/powder products in recirculated liquids. It has a wide range of applications, for example, preparation of pharmaceutical syrops or dissolution of pectin in glucose for marmalade production. Every model has an option with an in-line mixer for a complete dissolution of possible lumps. The typical applications are reconstitution or stabilization of milk in the production of dairy products, and dissolution of sugar for the production of syrup in the beverage industries.

Operating Principle:
  • The table blender is a compact unit, it consists of a centrifugal pump with a venturi system at the suction side and a hopper with a butterfly valve at the upper part to add solid product to the pumped liquid. In this blender, the suction and ventury system are set horizontally. If necessary, an in-line mixer can be installed after the centrifugal pump to reduce the size of possible lumps.
  • The venturi system and the suction of the pump create depression at the base of the hopper. When the valve of the hopper opens, the solids are drawn from the hopper and are totally dissolved when they pass through the casing of the pump.
  • To achieve the best possible dissolution, it is recommended to recirculate the product (batch production) till all the solid/powder product is suctioned and then, when the solid product is completely incorporated into the liquid product, continue recirculating the product for a while. In some cases, it can be used in-line depending on the solid product to add and the required level of.
Request
Callback
Yes! I am Interested

Inoxpa MM-3 355 Kg Table Blender

Inoxpa MM-3 355 Kg Table Blender
  • Inoxpa MM-3 355 Kg Table Blender
  • Inoxpa MM-3 355 Kg Table Blender
  • Inoxpa MM-3 355 Kg Table Blender
  • Inoxpa MM-3 355 Kg Table Blender
  • Inoxpa MM-3 355 Kg Table Blender
  • Inoxpa MM-3 355 Kg Table Blender
Get Best Quote
Approx. Price: Rs 8 Lakh / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
Weight355 kg
BrandInoxpa
ModelMM-3
TypeTable Blender
Parts In Contact With The ProductAISI 316L (1.4404)
Other Steel PartsAISI 304 (1.4301)
Gaskets In Contact With The ProductEPDM
Rotary PartSilicon carbide (SiC)
Stationary PartSilicon carbide (SiC)
Internal And Hopper Surface FinishBright polish Ra Less Than Equals To 0,8 Micro m
External Structure And Upper Base Surface FinishMatt
DNi3 Inch
A240
B849
C1056
D470
E850
F1770
G1268
H448

The table blender is used to dissolve solids / powders in recirculated liquids. It has a wide range of applications, for example, preparation of pharmaceutical syrops or dissolution of pectin in glucose for marmelade production. Every model has an option with an in-line mixer for a complete dissolution of possible lumps. The typical applications are reconstitution or stabilization of milk in the production of dairy products, and dissolution of sugar for the production of syrup in the beverage industries.

Operating principle :
The table blender is a compact unit, it consists of a centrifugal pump with a venturi system at the suction side and a hopper with a butterfly valve at the upper part to add solids / powders to the pumped liquid. In this blender, the suction and ventury system are set horizontally. If necessary, an in-line mixer can be installed after the centrifugal pump to reduce the size of possible lumps.
The venturi system and the suction of the pump create depression at the base of the hopper. When the valve of the hopper opens, the solids are drawn from the hopper and are totally dissolved when they pass through the casing of the pump.
To achieve the best possible dissolution, it is recommended to recirculate the product (batch production) till all the solid / powder product is suctioned and then, when the solid product is completely incorporated into the liquid, continue recirculating the product for a while. In some cases, the blender can be used in-line depending on the solid product to add and the required level of dissolution.

Features :
  • Very simple and versatile equipment for a fast and homogeneous mixing of a wide range of solid products without any contact with atmosphere.
  • Hygienic design.
  • ISO 2852 Clamp connections for easy assembly/disassembly.
  • Cleaning and disinfection without disassembling the unit.
  • Complete mixing with recirculation.
  • Manually actuated butterfly valve for hopper.
  • Optional in-line mixer for total dissolution of possible lumps in the end product.
  • Hopper welded to the table with a totally smooth easy-to-clean surface.
  • St.St. control panel with Stop/Start button and motor protection.
  • Skid with wheels: 2 rotating + 2 fixed with brakes.
  • Clamp drain port for total drainage of the skid.

Options :
  • Double mechanical seal.
  • Solenoid valve for the seal cooling system.
  • Gaskets: FPM or PTFE.
  • Connections: DIN, SMS.
  • Vibrator for hopper.
  • Frequency converter for the centrifugal pump.
  • Pneumatically actuated valve + lower level sensor for solids.
  • Hygienic upper level sensor for solids.
  • Control panel for the vibrator, level sensors, frequency converter and automated valve.
  • Grid for hopper.
Request
Callback
Yes! I am Interested

Inoxpa MV250 250 Litres MV V-Type Solid Blender

Inoxpa MV250 250 Litres MV V-Type Solid Blender
  • Inoxpa MV250 250 Litres MV V-Type Solid Blender
Get Best Quote
Approx. Price: Rs 60 Lakh / PieceGet Latest Price

Product Details:

BrandInoxpa
Power1.5 kW
Usage/ApplicationIndustrial
Weight995 Kg
Useful Volume125 litres
TypeMV V-Type Solids Blenders
Total Volume250 litres

The V-type blender is used to produce homogeneous solid-solid mixture. Mixing is a common process step in the manufacture of products for industries such as healthcare, pharmaceutical, food, chemicals, cosmetics, detergents, colorants, fertilizers and plastics.
Examples of materials or substances mixed in this way include pharmaceuticals, flour for confectionery, fish meal, refined or white flour, whole wheat flour, flour for coating, dextrins, enzymes, coffee, cocoa, milk powder, chocolate, gelatine, crème caramel and dessert powder, baby food, custard powder, starches, seeds, pigments, colorants, cosmetics, powdered or granulated plastics, fiberglass, etc.

Operating principle :
The unit consists of two cylinders arranged in a "V" shape with an angle of 80°. A manually actuated inspection and loading port is provided at the end of each cylinder, allowing access to its interior. The product outlet is located at the point where the two cylinders are joined and is fitted with a manually or automatically actuated butterfly valve. The geared motor and the bearing system are located within the lateral supports holding the blender body.
The solids are introduced into the blender through the loading aperture. The mixing performance is of 50%, that is, with each turn of the blender, the product located in the two cylinders moves into the central common section, and this is repeated continuously. The speed is not high, which makes this unit especially suitable for products that need to be
The mixture is discharged through a hermetically closing butterfly valve which can be operated manually or automatically.
The unit is provided with a guard rail with electrical safety to prevent the operator from accessing it when in operation. If anyone should gain access to the unit, for safety reasons, the operation will cease.

Features :
  • The series consists of 10 models with a total capacity of 50 to 4200 litres and a useful capacity of 50% of the total.
  • Mixing times vary between 3 and 15 minutes depending on the mixture.
  • The unit incorporates a guard rail with electrical safety, according to EC safety standards. The unit is manufactured in AISI 316 (EN 14404) quality for all parts in contact with the product and AISI 304 (EN 14301) for the supports and the rest of the equipment. The internal and external surfaces have a bright polished finish. Due to the polished surface and absence of edges or corners, the unit can be easily cleaned either manually or automatically with CIP system.

Options :
  • This unit allows the incorporation of a liquid spray system to introduce liquids in spray form during the process. The injector is connected to the spray nozzles by means of a rotary system and is fed with additives from a pressurized tank or by means of a variable speed displacement pump at constant pressure.
  • The automatic stop positions are: loading, discharging, and sampling. Before stopping at one of these three positions, the system performs a cycle which slows down the mixer in order to reach the stopping position with the highest possible accuracy and remains halted at that point.
  • The unit can be equipped with an automated loading system for introducing powders and granules into the blender body by means of a vacuum unit with self-cleaning hoses. It prevents creation of dust.
  • The skid can also be provided with a complete monoblock vacuum unit with liquid ring pump.
  • It is possible to install an automated vacuum discharge system. It includes a product receiving hopper with an automated
  • self-cleaning filter; as well as a control panel for the unit.
  • The loading/discharge can be carried out with pneumatically actuated retractable hermetic bellows. This system and the vacuum loading/discharge can be combined.
Request
Callback
Yes! I am Interested

Inoxpa MM-3 355 Kg Table Blenders

Inoxpa MM-3 355 Kg Table Blenders
  • Inoxpa MM-3 355 Kg Table Blenders
Get Best Quote
Approx. Price: Rs 8 Lakh / PieceGet Latest Price

Product Details:

BrandInoxpa
Usage/ApplicationIndustrial
Weight355 kg
TypeATable Blender
Stationary PartSilicon carbide (SiC)
Rotary PartSilicon carbide (SiC)
Parts In Contact With The ProductAISI 316L (1.4404)
Other Steel PartsAISI 304 (1.4301)

The table blender is used to dissolve solids / powders in recirculated liquids. It has a wide range of applications, for example, preparation of pharmaceutical syrops or dissolution of pectin in glucose for marmelade production. Every model has an option with an in-line mixer for a complete dissolution of possible lumps. The typical applications are reconstitution or stabilization of milk in the production of dairy products, and dissolution of sugar for the production of syrup in the beverage industries.

Operating principle :
The table blender is a compact unit, it consists of a centrifugal pump with a venturi system at the suction side and a hopper with a butterfly valve at the upper part to add solids / powders to the pumped liquid. In this blender, the suction and ventury system are set horizontally. If necessary, an in-line mixer can be installed after the centrifugal pump to reduce the size of possible lumps.
The venturi system and the suction of the pump create depression at the base of the hopper. When the valve of the hopper opens, the solids are drawn from the hopper and are totally dissolved when they pass through the casing of the pump.
To achieve the best possible dissolution, it is recommended to recirculate the product (batch production) till all the solid / powder product is suctioned and then, when the solid product is completely incorporated into the liquid, continue recirculating the product for a while. In some cases, the blender can be used in-line depending on the solid product to add and the required level of dissolution.

Features :
  • Very simple and versatile equipment for a fast and homogeneous mixing of a wide range of solid products without any contact with atmosphere.
  • Hygienic design.
  • ISO 2852 Clamp connections for easy assembly/disassembly.
  • Cleaning and disinfection without disassembling the unit.
  • Complete mixing with recirculation.
  • Manually actuated butterfly valve for hopper.
  • Optional in-line mixer for total dissolution of possible lumps in the end product.
  • Hopper welded to the table with a totally smooth easy-to-clean surface.
  • St.St. control panel with Stop/Start button and motor protection.
  • Skid with wheels: 2 rotating + 2 fixed with brakes.
  • Clamp drain port for total drainage of the skid.

Options :
  • Double mechanical seal.
  • Solenoid valve for the seal cooling system.
  • Gaskets: FPM or PTFE.
  • Connections: DIN, SMS.
  • Vibrator for hopper.
  • Frequency converter for the centrifugal pump.
  • Pneumatically actuated valve + lower level sensor for solids.
  • Hygienic upper level sensor for solids.
  • Control panel for the vibrator, level sensors, frequency converter and automated valve.
  • Grid for hopper.
Request
Callback
Yes! I am Interested

Inoxpa MV50 50 Litres MV V-Type Solids Blender

Inoxpa MV50 50 Litres MV V-Type Solids Blender
  • Inoxpa MV50 50 Litres MV V-Type Solids Blender
  • Inoxpa MV50 50 Litres MV V-Type Solids Blender
  • Inoxpa MV50 50 Litres MV V-Type Solids Blender
  • Inoxpa MV50 50 Litres MV V-Type Solids Blender
  • Inoxpa MV50 50 Litres MV V-Type Solids Blender
Get Best Quote
Approx. Price: Rs 60 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationPharma
Power1 kW
Weight450 Kg
BrandInoxpa
TypeMV V-Type Solids Blender
ModelMV50
Total Volume50 litres
Useful Volume25 litres
A1040
B1400
C2210
O Slash D300
E1950
F500
G2500
K600

The V-type blender is used to produce homogeneous solid-solid mixture. Mixing is a common process step in the manufacture of products for industries such as healthcare, pharmaceutical, food, chemicals, cosmetics, detergents, colorants, fertilizers and plastics.
Examples of materials or substances mixed in this way include pharmaceuticals, flour for confectionery, fish meal, refined or white flour, whole wheat flour, flour for coating, dextrins, enzymes, coffee, cocoa, milk powder, chocolate, gelatine, crème caramel and dessert powder, baby food, custard powder, starches, seeds, pigments, colorants, cosmetics, powdered or granulated plastics, fiberglass, etc.

Operating principle :
The unit consists of two cylinders arranged in a "V" shape with an angle of 80°. A manually actuated inspection and loading port is provided at the end of each cylinder, allowing access to its interior. The product outlet is located at the point where the two cylinders are joined and is fitted with a manually or automatically actuated butterfly valve. The geared motor and the bearing system are located within the lateral supports holding the blender body.
The solids are introduced into the blender through the loading aperture. The mixing performance is of 50%, that is, with each turn of the blender, the product located in the two cylinders moves into the central common section, and this is repeated continuously. The speed is not high, which makes this unit especially suitable for products that need to be
The mixture is discharged through a hermetically closing butterfly valve which can be operated manually or automatically.
The unit is provided with a guard rail with electrical safety to prevent the operator from accessing it when in operation. If anyone should gain access to the unit, for safety reasons, the operation will cease.

Features :
  • The series consists of 10 models with a total capacity of 50 to 4200 litres and a useful capacity of 50% of the total.
  • Mixing times vary between 3 and 15 minutes depending on the mixture.
  • The unit incorporates a guard rail with electrical safety, according to EC safety standards. The unit is manufactured in AISI 316 (EN 14404) quality for all parts in contact with the product and AISI 304 (EN 14301) for the supports and the rest of the equipment. The internal and external surfaces have a bright polished finish. Due to the polished surface and absence of edges or corners, the unit can be easily cleaned either manually or automatically with CIP system.

Options :
  • This unit allows the incorporation of a liquid spray system to introduce liquids in spray form during the process. The injector is connected to the spray nozzles by means of a rotary system and is fed with additives from a pressurized tank or by means of a variable speed displacement pump at constant pressure.
  • The automatic stop positions are: loading, discharging, and sampling. Before stopping at one of these three positions, the system performs a cycle which slows down the mixer in order to reach the stopping position with the highest possible accuracy and remains halted at that point.
  • The unit can be equipped with an automated loading system for introducing powders and granules into the blender body by means of a vacuum unit with self-cleaning hoses. It prevents creation of dust.
  • The skid can also be provided with a complete monoblock vacuum unit with liquid ring pump.
  • It is possible to install an automated vacuum discharge system. It includes a product receiving hopper with an automated
  • self-cleaning filter; as well as a control panel for the unit.
  • The loading/discharge can be carried out with pneumatically actuated retractable hermetic bellows. This system and the vacuum loading/discharge can be combined.
Request
Callback
Yes! I am Interested
X

Product Videos

Explore More Product



Reach Us
Shankar Kalkundri (DGM Sales)
Inoxpa India Private Limited
Survey No. 83, Hissa No. 2/6/A
Shivane, Pune - 411023, Maharashtra, India


Call Us


Send E-mailSend SMS